Temperature range : Water up to 140°C
Temperature controller : MP-888 self-adjusting controller with digital display of desired and actual temperature. Automatic temperature control.
Flow control : Electronic, with digital display of flow rate and minimum flow monitoring.
Heating capacity 6 kW : 3/3 stage switching
Pump capacity : 1.3 kW motor, max. 4 bar / max. 40 l/min.
Filling : Automatic
Connections : Heat transfer circuit : 1⁄2″ female thread, Cooling water : 3⁄8″ female thread, Inlet with water filter 3⁄8″ female thread
Dimensions (L×W×H) : 680 × 305 × 760 mm, including casters
Weight : approx. 70 kg empty
Color : Silver gray RAL 7001
All known voltages are available from 3 x 200 V to 3 x 600 V in 50/60 Hz. UL/CSA compliant units also available. For the U.S. market, units are equipped with U.S. inch (NPT) connections and the temperature controller is factory adjusted in degrees F.
• Self-adjusting controller with digital indication of desired and actual temperature. High control accuracy, display to 1/10 of a degree. Adjustable in °C or °F.
• Automatic temperature monitoring. Alarm is activated when the actual temperature deviates from the desired temperature.
• Digital flow rate display and minimum flow rate monitoring.
• Display of system pressure.
• Automatic pressure relief, venting and filling.
• Non-scaling heat exchanger.
• Standard pump with mechanical seal.
• All components in contact with water are made of stainless steel or bronze.
• Heater switching in stages.
• Safety devices :
> Level control for protection against dry running.
> Electronic temperature limitation in the controller and separate safety thermostat.
> Main switch, transformer and motor protection switch.
> Audible fault alarm
• All faults are indicated visually.
• Unit on wheels.
Option :
MP-988 controller, including more than 30 digital interfaces as standard: RS-232, RS-485, Current Loop 20mA, CAN-bus, Profibus etc.